GB 23
ERRORS
Problem
The “quick cycle” indicator is
flashing.
The “eco cycle” indicator is
flashing.
Potential causes
Water intake time is too long.
Appliance overfilled
Solution
Inlet tap not opened.
Water supply is excessive.
Error codes
Should the appliance become overfilled or exhibit excessive leaking,
shut off the inlet tap and alert the service department.
Technical data sheet
Capacity 12 place settings
Height 820 mm
Width 595 mm
Depth 540 mm
Noise level 47 dB (A) re 1 pW
Power supply 230 V, 50 Hz
Connected load 1930 W
Connected load off-mode 0 W
Connected load stand-by 0,6 W
Water pressure 0,4-10 bar) - 0,04-1 MPa
Energy rating A+
Annual energie consumption 291 kWh
Energie consumption standard
cleaning cycle 1,02 kWh
Annual water consumption 3360 liter
Drying efficiency class A
Standard cleaning cycle ECO 50 °C
Program duration standard
cleaning cycle 165 min.
Weight (Net) 45 Kg
To Next Page
Loading...
