EN 12
INSTALLATION
Preparation
The exhaust-air pipe can be mounted to the top or the rear of the
cooker hood. Remove the lid (A). Connect the exhaust-air pipe to the
flange (D).
Recirculation
This cooker hood is suitable for recirculation use (see ‘Cooker hood
systems’). Convert the cooker hood for recirculation use according to
the drawings below (AO561).
Turn air distribution lever (C) on the motor housing to the ‘recirculation’
position if the cooker hood is used in the recirculation-air mode
(AO761).
3
To Next Page
Loading...
