ETNA nova freshbrew fp - Machine identification inside the machine; Used machines and the environment; General safety instructions and restrictions

8
© ETNA Coffee Technologies b.v.
Instruction for use Nova freshbrew FP
COFFEE TECHNOLOGIES
1.7 Machine identification inside the machine
1. Model number
2. Voltage
3. Frequency
4. Power rating
5. Serial number
6. Water pressure
7. M.C.C.
The identification plate is on the inside of the left-hand frame plate.
1.8 Used machines and the environment
j
Ask your local authority for information on ways to recycle
materials safely and in an environmentally friendly
manner.
a
Ask your local authority for information on ways to dispose
of materials safely and in an environmentally friendly
manner.
1.9 General safety instructions and restrictions
The manufacturer does not accept liability for any damage caused by
any failure to (strictly) observe the safety instructions or by
carelessness during use and cleaning of the machine and any
associated accessories.
Depending on the specific operating conditions or accessories used,
additional safety instructions may apply. Please contact your dealer
immediately if you encounter any hazards when using the machine.

The user of the machine is fully responsible at all times for
observing locally applicable safety regulations and
guidelines.
Figure 1-5
2
3
6
1
4
Model: xxxxxxx
Voltage: a.c. xxxv xx Hz xxx kw
Water: xxx - xxx kPa
4A
012540E1
m.c.c. xxx-xxx-xxx-xxx
ETNA Coee Technologies BV
Doetinchem Holland
5
7