EN 12
OPERATION
Programming the kitchen timer
1. Touch or until the symbol on the display starts flashing.
2. Touch .
▷ The indication ‘00:00’ will appear on the display.
3. Select the time after which you want the audio signal of the kitchen timer to sound by
touching or .
▷ You will hear an audio signal to confirm that the time has been set and the clock will
start counting down from the selected time. The symbol will flash slowly.
▷ Once the time has expired, an audio signal will sound and the symbol will flash
quickly.
4. Touch any key to stop the audio signal. The symbol will then disappear.
If you wish to modify the time of the kitchen timer, repeat the steps shown. Upon
entering the kitchen timer, the time currently remaining will appear, which you will be able
to adjust.
With the kitchen timer function, the remaining time will show permanently on the display.
With this programmed function, it is not possible to view the time or the programmed
cooking time.
With the kitchen timer function, the oven will not turn off when the time expires.
Programming the cooking time
1. Touch or until the symbol on the display starts flashing.
2. Touch .
▷ The indication ‘00:00’ will appear on the display.
3. Select the cooking time by touching or .
▷ An audio signal will sound, the remaining cooking time will appear on the display and
the symbol will flash slowly.
4. Select a cooking function and temperature.
▷ Once the cooking time has ended, the oven will turn off, an audio signal will sound and
the symbol will flash quickly.
5. Touch any key to stop the audio signal and turn off the symbol.
▷ The oven will switch on again.
6. Set the controls to the position to turn off the oven.
To Next Page
