EN 29
TROUBLESHOOTING
General
Try the solutions below if you have problems with your oven. You could save yourself the time
and effort of an unnecessary phone call to customer services.
The oven doesn’t work
• Check whether an oven function and temperature have been selected.
• Check that the electricity is working properly (fuse in the circuit breaker box/ plug
in the socket).
• Check whether the timer has been programmed.
The temperature indicator light does not come on
• Select a temperature.
• Select a function.
• It should only come on while the oven is heating up to the selected temperature.
There is smoke during use of the oven
• Normal during first use.
• Clean the oven regularly.
• Reduce the amount of fat or oil in the baking tray.
The food is overcooked or undercooked
• Check whether the correct oven setting has been selected.
• Check whether the correct temperature has been set.
Condensation appears inside the oven.
• This is normal. Wipe the oven clean after use.
The fan continues to operate after the oven has been switched off.
• This is normal. The fan will keep working for a while after the oven has been switched off.
My accessories and guide rails are damaged after pyrolysis.
• You did not remove the accessories and guide rails before the pyrolytic cleaning cycle. You
must replace them and remove them during subsequent cleaning cycles.
The enamel colour has changed or stains have appeared.
• The chemical composition of some foodstuffs may cause changes in the enamel. This is
normal and does not damage the properties of the enamel.
To Next Page
