The amplifier must be securely mounted to a solid surface. Please
select a dry location in the trunk or passanger area only. Do not
mount the amplifier to any area that may have excess vibration.
Position the amplifier in an area that receives sufficient airflow for
proper heat dissipation.
6
Caution: Use care when removing interior trim panels. Car
manufacturers use a variety of fastening devices that can be
damaged in the disassembly process.
A 5 mm² (AWG 10) or larger wire should be used for power and
ground connections. We recommend a fuse be installed on the
power wire within 45 cm (18“) of the battery for safety reasons.
The ground wire should be connected directly to the chassis of your
automobile. Never use seat or seatbelt bolts for grounding.
For the other connections please see the following system confi-
gurations.
The ETON Audio Amplifier line has been thoroughly tested and we
feel confident that you will be pleased with your purchase. Should
you experience a problem with an ETON Audio Amplifier, please
contact your authorized ETON Audio dealer.
To Next Page
Loading...
Need help?
General
