Oiling plug:
In winter, if it is difficult to start the
engine, pull the plug out and fill 2cc of lube oil
into the hole and then put the plug back in
place. Make sure the plug is tight, if not, the
engine can absorb dust into the combustion
chamber and damage itself.
Compression release lever:
Push the lever down
to start the engine
Muffler
The
factory
has
replaced
the
engine
fuel
and
engine
oil
once
already.
To
check
the
fuel
pipeline,
make
sure
the
fuel
line
is
completely drained.
IF
there
is
air
in
the pipeline,
drain
it
out.
To
do
this,
loosen
the
nut
between
the
injection
pump
and
fuel
pipe,
then
drain
out
the
air
until
there
are
no
bubbles
left
in
fuel
line.
Oil Lubricant Inlet:
Place the engine on level ground and fill the lubricant into the inlet. When checking the
oil level, gently place the dipstick into the oil. Do not turn the oil scale.
17
To Next Page
Loading...
Need help?
General
