EasyManua.ls Logo

EUFAB 12010LAS - Fitting the Bicycle Carrier; Before first use; Fitting the registration plate to the bicycle carrier

EUFAB 12010LAS
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20
WARNING!
ATTENTION!
ATTENTION!
WARNING!
WARNING!
Personal injury or material damage possible
due to an unsecured/incorrectly mounted
bicycle carrier.
The moving parts of the bicycle carrier constitute a
source of danger if not properly mounted.
Material damage due to opening tailgate.
The tailgate could hit against the bicycle carrier and
be damaged.
Material damage caused by hot exhaust gases.
Damage can be caused to the bicycle carrier or the
bicycles if the the exhaust pipe is too close.
Personal injury or material damage possible
due to protruding parts.
Parts protruding beyond the edge of the vehicle or
bicycle carrier can cause personal injury or material
damage when driving.
Personal injury or material damage due to
overloading.
Exceeding the max. load capacity of th bicycle
carrier as well as the permissible load on the
coupling joint of the trailer coupling or the
permissible overall weight can lead to serious
accidents.
Disassemble the bicycle carrier when not in use.
4
Only mount parts that do not protrude beyond
the edge of the vehicle.
4
Observe the information on the max. load
capacity, permissible coupling joint load and
permissible overall weight of your vehicle.
Never exceed these specications.
4
Switch o the electric tailgate and operate
them manually.
4
If necessary, use an exhaust deector.
4
Fold down the bicycle carrier before opening
the tailgate.
4
Fitting
Before rst use
Fitting the registration plate to the bicycle
carrier

Table of Contents

Related product manuals