1514
ADJUSTING THE LIGHTING
ANGLE
Manually pull up and down or left and right to adjust the floodlight
vertically or horizontally.
RESTORING POWER
1. Switch on the main circuit breaker in the house.
ON
In case the floodlight camera is not powered on, switch off the circuit
breaker before checking the wiring of the floodlight camera.
2. Now you can access various features and change settings in the
eufy Security app.
For troubleshooting, check the Help section in the eufy Security app.
LED LIGHT GUIDE
Solid Violet System is initializing
Solid Blue Working normally or ready for setup
Blinking Red Not connected to the internet
Solid Red Recording or the live stream is being viewed
Flashing Blue and Red
Firmware upgrade in progress
Note: Keep the camera connected to a power source
To Next Page
Loading...
Need help?
General