eufy Security T8222 - Mounting the Doorbell; Attaching Doorbell to Mount

13
English English
14
1
2
15° Mounting
Wedge (Optional)
Mounting Bracket
(Attached to 15° Mounting Wedge)
Without 15° Mounting Wedge
With 15° Mounting Wedge
Mounting
Bracket
Wall
Mounting
Wedge
Mounting
Bracket
Wall
Power Drill with
1/4" (6.35mm) Drill Bit
(User provides it.)
Screw Packs (Spare screws
and anchors are included.)
15/64”(6 mm) Drill Bit
STEP 6 MOUNTING THE DOORBELL
Mount the Doorbell
Align the doorbell with the top of the mount and then snap the bottom into place.
You’re all set!
If you want to detach the doorbell or recharge it, please refer to the following
sections.