To Next PageTo Next Page
Need help?Do you have a question about the eufy Security T8210 and is the answer not in the manual?
General| Model Number | T8210 |
|---|---|
| Category | Accessories |
| Brand | eufy Security |
| Connectivity | Wireless |
| Wireless Protocol | Wi-Fi |
| Power Source | Battery |
| Battery Type | Lithium-ion |
| Operating Temperature | -20°C - 50°C (-4°F - 122°F) |
| Camera Resolution | 1080p |
| Field of View | 140° |
| Night Vision | Yes |
| Two-Way Audio | Yes |
| Storage | Local storage via HomeBase |
| Product Type | Security Camera |
| Compatibility | Compatible with eufy Security devices |
Lists all items included for the video doorbell installation.
Lists all items included for the HomeBase 2 installation.
Details front and rear views, including sensors, buttons, and ports.
Explains the roles of the doorbell and HomeBase in motion detection and notification.
Guides on powering and connecting the HomeBase to the internet using an Ethernet cable.
Instructions for downloading the app and setting up a user account for system configuration.
Describes using the built-in battery for the doorbell, offering flexibility in placement.
Explains powering the doorbell via existing doorbell wires, limiting mounting position.
Provides factors and considerations for choosing the best mounting position for the doorbell.
Details how to securely attach the mounting bracket to wooden surfaces using provided screws.
Guides on drilling holes and using anchors to mount the bracket on brick, concrete, or stucco.
Instructions on how to align and snap the doorbell onto the installed mounting bracket.
Steps to remove the doorbell from the mounting bracket using a detaching pin.
Explains how to charge the doorbell battery, including LED indications and charging time.
Steps to check if existing doorbell wires are operational before proceeding with wired installation.
Instructions on removing the old doorbell button and pulling out the wires.
Guidance on selecting the mounting position specifically for a wired doorbell installation.
Details on mounting the bracket for wired installation, covering both wooden and hard surfaces.
Step-by-step guide on connecting the house wires to the doorbell's terminals.
Final steps of mounting the doorbell and restoring power to the system after wired installation.
Covers FCC compliance rules, warnings, and interference guidelines for the device.
Details the device's compliance with RF exposure limits and minimum separation distances.
States the device's compliance with essential requirements of EU directives.
Details Industry Canada compliance and RF exposure requirements for the device.
Provides details about the product's 12-month limited warranty coverage.
Offers phone numbers and an email address for customer support inquiries.
