eufy Security HomeBase 2 User Manual

Anker Innovations Limited. All rights reserved.
eufy Security and eufy Security
Logo
are trademarks of Anker Innovations Limited, registered in the United
States and other countries. All other trademarks are the property of their
respective owners.
51005001867 V01
QUICK
START GUIDE
Video Doorbell 2K (Battery-Powered) Set

eufy Security HomeBase 2 Specifications

General

Storage	16GB eMMC
Model	T8010
Expandable Storage	No
Connectivity	Ethernet, Wi-Fi
Compatibility	eufy Security devices
Wireless Range	300 ft (open area)
Operating Temperature	-10°C to 45°C
Operating Humidity	0% to 95% (non-condensing)

Summary

Product Overview

Video Doorbell Operation

Explains how to power on, add, power off, and reset the doorbell.

How the System Works

Step 1: Connecting the Homebase

Connect HomeBase 2 to Internet

Guides connecting the HomeBase to the router and power.

Step 2: Setting Up the System

Download and Set Up Eufy Security App

Instructions to download the app and create an account for setup.

Step 3: Determining the Power Option

Option 1: Battery Powered

Details using the built-in battery for the doorbell.

Option 2: Doorbell Wire Powered

Details using existing doorbell wiring to power the doorbell.

Step 4: Finding a Mounting Spot

Find a Mounting Spot Considerations

Provides factors to consider when choosing a mounting location.

Step 5: Mounting the Bracket

Mounting on a Wooden Surface

Instructions for mounting the bracket on a wooden surface.

Mounting on Hard Materials

Step 6: Mounting the Doorbell

Mount the Doorbell onto Bracket

Appendix 1: Detaching the Doorbell

Detach the Doorbell

Appendix 2: Recharging the Doorbell

Recharge the Doorbell

Appendix 3: Powering with Existing Doorbell Wires

Verify Doorbell Wires

Instructions to check if existing doorbell wires are functional.

Detach Existing Doorbell Button

Find a Mounting Spot

Guidance on determining the optimal mounting position for the doorbell.

Mount the Bracket

Connect Doorbell Wires to Doorbell

Steps to connect existing wires to the new doorbell.

Mount the Doorbell on the Bracket

Restore Power