eufy Security HomeBase 2 User Manual

12
English English
13
Place the Screw Hole Positioning Card against the wall to mark the position.
STEP 5 MOUNTING THE BRACKET
Mount the Doorbell on a Wooden Surface
If you’re mounting the doorbell on a wooden surface, you don’t need to pre-drill
pilot holes. Use the provided screws to secure the Mounting Bracket on the wall, The
Screw Hole Positioning Card indicates the position of the screw holes.
What is required: Screwdriver, Mounting Bracket, 15° Mounting Wedge (Optional),
Screw Packs
Phillips-Head Screwdriver
(not provided)
Wall
Wall
Mounting
Bracket
Mounting
Wedge
Mounting
Bracket
Mounting Bracket
(Attached to 15° Mounting
Wedge)
15° Mounting
Wedge (Optional)
Screw Packs (Spare screws
and anchors are included.)
Without 15° Mounting Wedge With 15° Mounting Wedge

eufy Security HomeBase 2 Specifications

General

Storage	16GB eMMC
Model	T8010
Expandable Storage	No
Connectivity	Ethernet, Wi-Fi
Compatibility	eufy Security devices
Wireless Range	300 ft (open area)
Operating Temperature	-10°C to 45°C
Operating Humidity	0% to 95% (non-condensing)