eufy Security HomeBase 2 User Manual

16
English English
17
STEP 6 MOUNTING THE DOORBELL
Mount the Doorbell
Align the doorbell on top and then snap it on the bottom. Press it down until it clicks
into place.
You’re all set!
If you want to detach the doorbell or recharge it, please refer to the following
sections.
APPENDIX 1 DETACHING THE DOORBELL
Detach the Doorbell
1. Use the doorbell detaching pin provided if you wish to detach the doorbell from
the Mounting Bracket.
2. Press and hold the hole on the bottom of the doorbell and then lift its bottom to
take it off.
What is required: Doorbell Detaching Pin
Doorbell
Detaching Pin

eufy Security HomeBase 2 Specifications

General

Storage	16GB eMMC
Model	T8010
Expandable Storage	No
Connectivity	Ethernet, Wi-Fi
Compatibility	eufy Security devices
Wireless Range	300 ft (open area)
Operating Temperature	-10°C to 45°C
Operating Humidity	0% to 95% (non-condensing)