eufy Security T8210 - Connect Doorbell Wires to the Doorbell Terminals

24
English English
25
2 2
Wall
Wall
Mounting
Bracket
Mounting
Wedge
Mounting
Bracket
Without 15° Mounting Wedge With 15° Mounting Wedge
3.5 Connect the Doorbell Wires to the Doorbell
Connect the wires to the terminals at the back of the doorbell, then tighten the
terminal screws. Wire can connect to any terminal.
What is required: Wires and Wire Nuts (Optional), Video Doorbell, Philips-head
Screwdriver
Extension Wires and
Wire Nuts (Optional)
Video Doorbell 2K (Wired)
Model: T8210
Phillips-Head Screwdriver
(User provides it.)
Note:
•
To prevent short-circuit, make sure the wires are not touching each other after
connecting them to the terminals.
•
If the wires are too short, use the extension wires and wire nuts provided to
make them longer. Use electrical wiring tape instead if there is no more space on
the wall for wire nuts.