eufy Security T8740 User Manual

01 EN
EN
02
INSTALLATION
S
tep 1.
Fix the Power Connector to the Doorbell Chime.
A. Place the Power Connector over the Chime in the direction the arrows
indicate.
B. Align the raised slots of the Power Connector with the notch on the base of
the Doorbell Chime.
C. Rotate clockwise to lock the Power Connector in place.
Step 2.
Plug the Doorbell Chime into an AC power supply at your desired
location.
Step 3.
Plug the USB dongle into the USB port on the back of the HomeBase 2.
WHAT’S IN THE BOX
Doorbell Chime
Model: T8740
Power Connector
(Pin type may vary
in different regions)
Doorbell Chime USB
Dongle for HomeBase 2
Model: T8741
WHAT’S REQUIRED FOR INSTALLATION?
This Doorbell Chime is an accessory exclusive to the eufy Security Video
Doorbell 2K (Battery-Powered).
The USB dongle enables eufy HomeBase 2 to connect to doorbell chimes. One
USB dongle can control up to 4 doorbell chimes.
The USB dongle can only work with HomeBase 2 when a eufy video doorbell is
connected to this HomeBase 2 and the doorbell is pressed.

eufy Security T8740 Specifications

General

Brand	eufy Security
Model	T8740
Category	Accessories
Language	English