EUFY C30 - Page 4

Step 2. Install Deadbolt
1. Check your door to see if the deadbolt requires adjustment.
If the backset is
70 mm, turn the
faceplate 180° to
extend the length.
2-3/8
2-3/4
180°
TOP
2⅜" / 60 mm
2¾" / 70 mm
Backset
Latch Hole
2. Insert and screw the deadbolt into the doorframe.
A
B
TOP
Make sure the
word "TOP" on
the deadbolt
faces up.
Step 3. Install Exterior Assembly
If the cross bore diameter of your door is 38 mm, remove the spacer before installing the exterior
assembly.
Cross Bore
Diameter
1 ½ in (38 mm)