EUFY C30 - Step 1. Prepare the Door

G
H
Silicone Plug
Screw
Step 5. Strike Plate Installation Set
I
J
Strike Plate Strike Plate Screws
Step 1. Prepare the Door
1. Remove the existing lock and check your door.
2. Check if your door has holes like the one below. Standard US doors are already compatible.
Backset
2⅜ in (60 mm) or
2¾ in (70 mm)
Minimum Distance
2⅜ in (60 mm)
Door Hole
Diameter
1 in (25 mm)
Door Thickness
1⅜ in - 2
¹
⁄ 6 in
(35mm - 55mm)
Cross Bore
Diameter
1 ½ in (38 mm)
2 ⅛ in (54 mm)
If not, follow the template to drill holes on your door.