Eumig MARK S 802D - User Manual

Key points for correct projector operation, including voltage and frequency checks, and transport lock removal.

Procedure to convert the projector from Super-8 film to Standard-8 film projection.

Explanation of the automatic film threading system and essential points for its correct operation.

Steps for setting up and running the projector for silent or sound film playback.

Instructions on how to adjust the projector's film running speed between 24 and 18 fps.

Step-by-step guide for safely removing and replacing the projection lamp.

Information on the projector's fuse, its function, and how to access and replace it.

General advice on maintaining the projector, focusing on cleaning film track and gate.

Guidance on film preservation, cleaning, and specific notes for striped film.

Detailed specifications for the projector's sound system, including inputs, outputs, and signal characteristics.

Description of the Eumig Daylight Viewer accessory for previewing films.

Guide to recording music and voice-over onto magnetically striped film.