Operating Manual
www.esglobal.co.kr
5
Ⅰ-3 : Installation
1.Put and turn the accessory holder into the machine
4. Put connector of Cavitation, Face, Body
Ⅰ. Structure of 3-MAX
* If the accessory holder doesn’t parallel the machine,
release 3 screws on the top and set the direction
correctly.
2. Hold hand-pieces to the accessory holder
3. Put in the hand-piece connector to the machine tightly
*Put the connector to the hole correctly.
It may cause serious problem to the pin inside of
the connector.
To Next Page
Loading...
