9.1 Model identification
On the barcode label on the Data Logger, the product code is placed next to the Data Matrix code on the left side.
DW1ST
DW2ST
10 Cleaning guide
It is possible to clean the Eupry Wi-Fi Data Logger, if the device gets contaminated or before sending the device back to
Eupry. We recommend using soap for removing visible stains and alcohol for disinfection.
Please use one of the following cleaning methods:
○ Using a dry cloth and rubbing alcohol over 70%, to ensure removal of most pathogens.
○ Using a wring out cloth with soap, to remove dirt.
User Guide: Eupry Wi-Fi Data Logger
Rev. 0.10 - June 2023 Page 9 of 10
Eupry ApS | www.eupry.com/ | +45 53 51 77 00 | support@eupry.com
To Next Page
Loading...