Eureka ATOM SPECIAL EDITION - Page 19

ATOM
SPECIAL EDITION
LIBRETTO ISTRUZIONI
USER HANDBOOK
MANUEL D’INSTRUCTIONS
GEBRAUCHSANWEISUNGEN
INSTRUCCIONES DE MANEJO
19
BASIC SAFETY
PRECAUTIONS
• Never touch the ma-
chine with damp or
wet hands.
• Never use the ma-
chine when barefoot.
• Never attempt to un-
plug the machine by
pulling the power cord
or the machine itself.
• Do not expose the ma-
chine to atmospheric
agents (sun rain, etc..).
• Never allow the ma-
chine to be used by
children or by irre-
sponsible persons.
• Always use the appli-
ance on a flat, steady
surface that is able to
support its weight.
• Always unplug the
machine from the
power supply be-
fore performing any
cleaning or mainte-
nance operations.
• Do not use water
jets or detergents for
cleaning the appli-
ance.
• In the case of ma-
chine breakdown or
malfunction switch
the machine off and
do not tamper with it.
• For repairs contact
only an authorized
service center and re-
quest use of original
spare parts.
• Non-observance of
the above precau-
tions may make the
machine unsafe for
future use.
• Do not leave the ma-
chine switched on
when not in use. Un-
plug the machine
when not in use.
• Do not obstruct the
ventilation and/
or heat dissipation
openings and/or slits
nor introduce water or
any other liquids into
same.
• Should the wire be
damaged, have it im-
mediately repaired by
the manufacturer, his
authorized after-sales
service, or skilled per-
sonnel.
• Never insert spoons,
forks or other utensils
into the coffee bean
container to make
withdrawals or inter-
ventions.
• Always switch off the
appliance before re-
moving blockages
from the coffee bean
container.
• Never place the appli-
ance in water or other
liquids.
• Should a foreign body
stop the motor, switch
the machine off im-
mediately and con-
tact an authorized
service center.
Those machines bearing the
“EL. MOTOR WITH THERMAL PRO-
TECTION” indication are
equipped with device which
protects the motor from over-
heating. When this device is
engaged, do not attempt to
ˢˣ˘˥˔˧˘ ˧˛˘ ˠ˔˖˛˜ˡ˘ʭ ˜˦ˢ˟˔˧˘
the machine from the power
supply and eliminate the
cause of the trouble before
re-starting.
SYMBOLS
A
C
B
ED
A General hazard
B Electrical shock
hazard
C Burns hazard
D Hazard of damage
to the machine
E Operation reserved
for the qualified
technician, in
compliance with
current standards