Eureka ATOM User Manual

11
EN
6.6 APPLIANCE SETTING
Display indicator legend (see Fig. 1)
18 Dispensing visualization of 1 coffee dose
19 Dispensing visualization of 2 coffee dose
20 Counter of dispensed 1 coffee dose
21 Counter of dispensed 2 coffee doses
22 Padlock (locked programming)
23 Dispensing time of preset 1 coffee dose
24 Dispensing time of preset 2 coffee dose
6.6.1 APPLIANCE SWITCH-ON
When switching the appliance on for the first time, it is configured in the mode
set by the factory and anyway, in the following uses, it will maintain the last
mode previous to switch off.

When switching the appliance on, the following screen is shown for some seconds.
Then the display shows the working screen.
6.6.2 DOSE DISPENSING AND SETTING (DISPLAY)
• By pressing the key for one dose (3) this lights up and the cup on the display is filled
(18) during dispensing.
• Once dispensing is completed, the time returns to set value for a new grinding.
• The single dose counter is increased of 1.
• By pressing the key for two doses (5)
this lights up and the cups on the display are
filled (19) during dispensing.
• Once dispensing is completed, the time returns to set value for a new grinding.
• The double dose counter is increased of 1.
• By pressing the increasing key (6)
and decreasing one (2) the dispensing time
of the properly selected dose is increased or decreased.
It is possible to manually stop dispensing by pressing the button (3) or (5)
(depending on the delivery in progress). The machine pauses:
• Press the dispensing keys to resume grinding started earlier.
• Press the button (4)
to finish the grinding in progress.


Eureka ATOM Specifications

General

Burr Type	Flat
Burr Size	60 mm
Grind Settings	Stepless
Hopper Capacity	300 g
Motor Power	450 W
Weight	7.6 kg
Burr Material	Hardened Steel
Motor Speed	1350 RPM
Power	450 W
RPM	1350 RPM