17
How to maintain your robot
Take out the dustbin: Press the dustbin release button
as shown and take out the dustbin.
01
Remove debris by tapping the filter against your
garbage bin. You can clean the dustbin, the filter and
filter mesh with water, but remember to dry them
THOROUGHLY before reinserting them into the robot
(Do not clean the filter elements with detergents).
03
Reinsert the dustbin into the robot. It is recommended to
clean the filter elements every week and replace them
every 1-3 months.
04
Open the lid of the water tank and clean out the
remaining water. Open the lid of the dustbin and take
out the filter.
02
▪ Dustbin/Water tank maintenance (clean as needed)
Release the mop
assembly and clean it.
01
Remove the mopping
cloth from the mop
holder.
02
Wash the mopping cloth
with water and dry it.
03
Place the cleaned
mopping cloth back to
the mop holder and
re-install the mop
assembly to the robot.
04
▪ Cleaning the mop assembly
CAUTION
Never operate robot without all filters, filter
screen and dustbin in proper position.
WARNING
Moving parts! Recharge robot vacuum cleaner
after each use.
Push/Pull Slot
To Next Page
Loading...
