31
EN
7 RICERCA GUASTI
If the problem persists, contact trained personnel.
GRINDER CONDITION CAUSE POSSIBLE SOLUTION
When starting by means of the
key (4), the display does not
turns on.
Coee containers (2) not inserted
or not inserted properly.
Check the position of the coee
container (2) and insert it
properly.
Request of burr replacement.
The operation of the grinder is
not jeopardised, but the outcome
could not be optimal.
This message is also shown for
some seconds every time the
grinder is switched on, while
the light remains on even
during operation.
Contact a skilled technician for
replacement of the burrs.
After replacement, reset the
counter in the maintenance
screen of the burrs and set
the size and the type of burrs
installed.
To Next Page
Loading...
