6
Eureka Customer Service HELPLINE 1-800-282-2886
Assembly and preparation before use
1. Installation of handle
Fasten the upper lock first,
and then install the handle
component.
2. Installation of battery pack
Insert the battery pack into
the bottom of the machine
until you hear a “click”
sound.
3. Connection of wand
When installing the wand
component, insert the
plug end of the wand
into the socket of the
handheld component until
you hear a "click" sound.
CAUTION
Moving parts! Always turn o hand vacuum before attaching accessories.
4. Connection of motorized
nozzle
Insert the wand
component into the
motorized nozzle until you
hear a "click" sound.
5. Storage of the machine
The rear of the hand vac is
inserted into the wall mount
and is to hang vertically as
shown. Accessories are also
stored on the wall mount.
To Next Page
Loading...
