Eureka Customer Service HELPLINE 1-800-282-2886
6
How to assemble your vacuum cleaner
Click!
Attach crevice tool and holder
by sliding it up onto the handle.
Wrap cord around the upper and
lower cord wraps on the back of
the vacuum. Clip plug onto the
cord.
Tilt vacuum up into its upright
position. Click!
Press the quick release button
on the hand vacuum grip and
insert the handle. Make sure it
is all the way inserted into the
body of the vacuum.
Attach the floor nozzle by
inserting it into the opening at
the bottom of the dust cup.
Press firmly to secure in place.
To Next Page
Loading...
Need help?
General
