Eureka Customer Service HELPLINE 1-800-282-2886
8
T
.
Maintaining pre-motor filter
Turn vacuum off. Then, unplug the vacuum.
Gently remove the filter
as shown.
To optimize suction and
cleaning performance,
remove and inspect the
pre-motor filter regularly.
If needed, clean with
warm water and a mild
detergent.
Air dry pre-motor filter for 24 hours
before placing back in the vacuum.
Empty dust cup into waste
container.
Replace filter. Attach dust
cup to vacuum. Make sure
dust cup is correctly secured.
To remove dirt from the dust cup and filter, hold
vacuum vertically. Press dust cup latch to
release the dust cup as shown.
To Next Page
Loading...
Need help?
General
