11
OPERATION INSTRUCTIONS
Upright Pause Function
In working state, you can step on the floor brush to erect the
body, the machine will stop working and enter standby state; it
will automatically turn o after 2 minutes of standby.
Self-cleaning + Drying Function
CAUTION
• After the self-drying is complete, it
automatically enters the charging state. It is
normal for the machine to indicate low battery after
self-drying in a low battery state.
• In the self-drying mode, to improve the drying eect,
the rolling brush will rotate every 2 minutes with a
"drip" sound, which is a normal phenomenon.
When the machine is in charging state, short press the
self-cleaning button to activate the self-cleaning and
self-drying mode. During the self-drying process, the roll
brush rotates for 30 seconds for centrifugal drying, followed
by the low-speed operation of the fan for 3-5h to properly
dry the roll brush and pipeline.
When the machine is in charging state, long press the mode
switch button for 3 seconds to directly enter the self-drying
mode.
To stop the self-cleaning or self-drying, press the
self-cleaning button again.
After the self-cleaning is completed, please clean the dirty
water tank in time. If there are residual stains on the base,
please clean them in time.
1.
2.
3.
4.
Mode button
To Next Page
Loading...