Eureka NEW430BL - Cleaning and Maintenance

12
CLEANING AND MAINTENANCE
Waste Water Detect Alarm
Press the button of dirty water tank with your thumb
and pull outward to remove the tank.
01
ATTENTION
• After cleaning, it is recommended to place
the machine upright in the charging base; do
not place the machine in places with direct
sunlight or moisture.
• In order not to aect the performance of
the machine, it is recommended that you
regularly maintain its parts.
• Before cleaning, please disconnect the
power supply to stop the machine.
• Scrub with water or neutral detergent,
wring out the cleaning cloth before
scrubbing to avoid water leaking into the
electrical components.
Pull
outwards
Hold the tank with one hand and pull out the top cover
of the tank with the other hand.
02
Dump the sewage from the side of the dirty water tank
and rinse it clean; remove the filter from the top cover of
the dirty water tank, rinse it clean, and air-dry it.
03
Install the dirty water tank back to the machine until
there is a click sound; (when installing dirty water tank,
it is recommended to hold the body with another hand
to avoid tipping over).
04
Top cover of
dirty water tank
Waste
water tank
Upwards
Cleaning
Filter
Air-dry
Install it back