13
CLEANING AND MAINTENANCE
Roll brush and Cover Cleaning
Press the buckle as shown in the diagram to remove the
floor brush cover.
01
Rotate the end cap knob as shown in the diagram and
pull out the roll brush sideways.
02
ATTENTION
• It is recommended to clean filter/roll brush
after every use and reaplce after 3-6 months.
• If residual stains are found on the suction
surface of the floor brush, wipe it with a wet
cloth. Do not rinse it with water.
If there is still hair or other debris tangled on the roll
brush after self-cleaning, remove the tangled debris from
the roll brush; for heavy-duty cleaning (such as tomato
sauce, soy sauce, etc.), if there is still dirt residue on the
roll brush after self-cleaning, it can be self-cleaned
again or the roll brush can be removed and cleaned
with water.
03
If there is residual dirt on the roll brush cover after
self-cleaning, rinse the roll brush cover with water.
04
Press extraction
a. Rotate the end
cap knob
b. Pull out the roller
To Next Page
Loading...