14
CLEANING AND MAINTENANCE
If there are any residual stains on the suction nozzle (the
part exposed after removing the roll brush) after
self-cleaning, please wipe it with a damp cloth instead of
washing it with water.
05
After cleaning, cover the floor brush, align it with the
installation hole, press it down, and you will hear a click
when it is successfully installed.
07
After cleaning, reinstall the roll brush. If not in
immediate use, you can place the roll brush in a
ventilated area to dry before installation.
06
suction nozzle
a. Reinstall the roller b. Screw the end cover
button
To Next Page
Loading...