16
Possible cause Solutiom
Suction power is weakened
Roll brush, roll brush cover and waste
water tank are not installed properly
Reinstall
The roll brush is entangled with hair and
other objects
Clean the roll brush
Water leaking from air outlet
The dirty water tank float is stuck
Empty tank and clean debris from the float, see
P13
Water leaking from bottom of machine Dirty water tank or filter isn't installed Reinstall dirty water tank and filter, see P13
The nozzle or pipe is blocked Clean up obstacles in the nozzle
Dirty water tank filter is dirty or missing Clean or install in the nozzle
Make sure vacuum is turned o and power cord is unplugged.
PROBLEM SOLVING
To Next Page
Loading...