Need help?Do you have a question about the EuroLite Color Chief and is the answer not in the manual?
General| Type | DMX Controller |
|---|---|
| MIDI | Yes |
| USB | No |
| DMX output connector | 3-pin XLR |
| Display | LCD |
| Power supply | 12V DC |
Describes the controller's easy handling and astounding results for colored spot lights.
Highlights the controller's support for up to 6 colors and integration of various LED units.
Explains the color wheel function and pre-recorded smart color effects for easier configuration.
Mentions additional controls beyond color, like dimmer, shutter, and free channels.
Details the simple process of memorizing scenes and chases into memory banks.
Explains the ability to run multiple chases and scenes simultaneously with individual timing.
Describes the USB interface for memorizing entire control panel setups onto a flash drive.
Lists the key features and capabilities of the DMX lighting desk.
Specifies indoor use only and warnings about rain and moisture.
Warns users to be careful with operations due to dangerous voltage and touching wires.
Defines the controller's purpose for DMX-controlled light effects and professional use.
Provides instructions for environmentally friendly disposal of the device and batteries.
Explains how to connect the controller to the DMX chain using XLR plugs.
Details how to connect the power adapter to the controller and a mains socket.
Describes connecting an audio unit for sound-controlled chase operation.
Guides on accessing system settings to begin fixture patching.
Explains how to set DMX start addresses for connected fixtures.
Details using the fixture library to assign DMX channels for devices.
Provides instructions for manually assigning DMX channels when fixtures are not in the library.
Describes using controls for color mixtures and setting colors of multiple lights.
Explains the use of the fader for devices with color wheels or simulating color functions.
Details the integrated color effects and how to create custom color effects.
Describes patching and using rotary controls for custom functions like movements.
Explains how the fader controls brightness and interacts with other controls.
Details the fader's function for shutter control and stroboscope mode.
Explains its use for adjusting effect speed and deleting unmemorized settings.
Outlines methods like ADD Step, Insert Step, Overwrite Step, Edit Step, and Del Step.
Explains how to recall stored programs and manage speed, fade, sound control, and brightness.
Guides on how to access and navigate the system settings menu.
Explains how to reset all DMX assignments and control channel options.
Details the process of resetting the controller to its original factory settings.
Describes storing light show settings and programs onto a USB memory device.
Explains how to load files from a USB memory device into the controller.
Covers managing the fixture library, loading, and deleting profiles.
To Next Page
