Need help?Do you have a question about the EuroLite DMX OPERATOR 240 and is the answer not in the manual?
General| Channels | 240 |
|---|---|
| Control Type | DMX |
| Display | LCD |
| DMX Output Connector | 3-pin XLR |
| Number of storable scenes | 240 |
| DMX Outputs | 1 |
| Power Supply Current | 500 mA |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 85 % |
Buttons, faders, and wheels for device operation and programming.
Ports for USB, audio, MIDI, DMX, fog machine, and power.
How to connect the controller to the DMX chain using XLR cables.
Connecting audio units and MIDI controllers for external control.
Connecting a fog machine and the power supply unit to a mains outlet.
Assigning DMX start addresses to light effect units.
Individually assigning DMX channels to control elements.
Inverting output values and assigning fade function to channels.
Resetting DMX address and channel assignments to default.
Adjusting and storing illumination scene values.
Modifying, deleting, and copying illumination scenes.
Copying memory banks and device settings.
Resetting all stored illumination scenes.
Activating scenes manually, time-controlled, or sound-controlled.
Compiling scenes into chases and memorizing them.
Adding scenes or memory banks into existing chases.
Removing specific scenes from a chase sequence.
Deleting individual chases or all programmed chases.
Playing chases manually, time-controlled, or sound-controlled.
Temporarily overwriting channel values and using the blackout function.
Identifying RDM devices and changing their DMX addresses.
Configuring autostart and resetting the controller to factory settings.
Storing and retrieving show data using a USB memory device.
Updating the controller's internal software via USB.
Controlling the unit via MIDI and operating the fog machine.
To Next Page
