EuroLite DMX Scene Setter 24/48 User Manual

00079614.DOCX, Version 1.7
25/28
Switching the Speed Range
The speed range can be switched from 5 minutes to 10 minutes.
Press and hold the RECORD button.
Press FLASH button 10 of PRESET A three times.
Release the RECORD button.
The 10MIN LED lights up and the right scale is activated.
The speed range can be switched from 10 minutes to 5 minutes.
Press and hold the RECORD button.
Press the FLASH button 5 of PRESET A three times.
Release the RECORD button.
The 5MIN LED lights up and the left scale is activated.
Inverting the Chaser Direction
Press the CHASE REV button.
The chaser direction is inverted.
Deleting a Step in a Chaser
Press the MODE SELECT button, until the CHASE/SCENES LED lights up.
Pull all channel faders to minimum.
Push the MASTER A fader to maximum.
Hold the EDIT button and press the chaser's FLASH button of PRESET B.
The chaser will be called up.
Pull the SPEED fader to minimum.
Press the STEP button in order to call up the desired step.
Press the DELETE button in order to delete the step.
Press and hold the RECORD button and press the REC EXIT button in order to leave the editing mode.
Adding a Step to a Chaser
Press the MODE SELECT button, until the CHASE/SCENES LED lights up.
Pull all channel faders to minimum.
Push the MASTER A fader to maximum.
Hold the EDIT button and press the chaser's FLASH button of PRESET B.
The chaser will be called up.
Press the MODE SELECT button, until the 1-48 SINGLE/PRESET PARK lights up.
Push the MASTER A fader to maximum.
Push channel faders to the desired setting.
Press the RECORD button.
Push all channel faders to minimum.
Press the MODE SELECT button, until the CHASE/SCENES LED lights up.
Pull the SPEED fader to minimum.
Press the STEP button in order to insert the step at the desired position.
Press the INSERT button in order to add the step.
Press and hold the RECORD button and press the REC EXIT button in order to leave the editing mode.
Deleting a Scene/Chaser
Press the MODE SELECT button, until the CHASE/SCENES LED lights up.
Press and hold the RECORD button and press the desired FLASH button of PRESET B twice.
The scene/chaser is deleted.

EuroLite DMX Scene Setter 24/48 Specifications

General

Brand	EuroLite
Model	DMX Scene Setter 24/48
Category	Lighting Equipment
Language	English