00117370, Version 1.0
21/24
Functions in DMX mode
1-channel mode
Channel Function Value Details
CH1
Master dimmer 000 – 255 Total brightness 0-100%
2-channel mode
Channel Function Value Details
CH1
Master dimmer 000 – 255 Total brightness 0-100%
CH2
Strobe
000 – 015 LED on
016 – 095 Strobe effect (1-25 Hz) with increasing speed
096 – 175 Pulse effect (1 Hz) with decreasing pulse width
176 - 255 Random strobe effect with increasing speed
3-channel mode
Channel Function Value Details
CH1
Master dimmer 000 – 255 Total brightness 0-100%
CH2
Fine dimmer 000 – 255 Fine dimmer (16 bit) 0-100%
CH3
Strobe
000 – 015 LED on
016 – 095 Strobe effect (1-25 Hz) with increasing speed
096 – 175 Pulse effect (1 Hz) with decreasing pulse width
176 – 255 Random strobe effect with increasing speed
CLEANING AND MAINTENANCE
The outside of the device should be cleaned periodically to remove contaminants such as dust etc. The lens,
in particular, should be clean to ensure that light will be emitted at maximum brightness.
1 Disconnect the device from power and allow it to cool before cleaning.
2 Clean the surface with a soft lint-free and moistened cloth. Never use alcohol or solvents as these may
damage the surface. Make sure that no liquids can enter the device.
3 The device must be dry before reapplying power.
There are no serviceable parts inside. Do not open the housing. Do not try to repair the device by yourself as
this may result in damage. Maintenance and service operations are only to be carried out by authorized
dealers. Should you need any spare parts, please use genuine parts. Should you have further questions,
please contact your dealer.
Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
1 Disconnect the device from power and allow it to cool.
2 Open the fuse holder of the mains connection with a fitting screwdriver.
3 Remove the old fuse from the fuse holder and replace it with a new fuse.
4 Carefully push the fuse holder back into its position before reapplying power.
To Next Page
Loading...
Need help?
General