EasyManua.ls Logo

Euromatic CH-2000E-1 - Maintenance and Safety Cautions; Troubleshooting and Storage

Euromatic CH-2000E-1
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | info@tempo.org
Other Useful Information (Cont.)
Troubleshooting
If your heater fails to operate, or you experience any other problem with the
appliance, contact our after sales line for advice or to arrange a service.
But before phoning for a service, please ensure that the heater is properly
plugged in and the outlet and circuit breaker or fuse are working properly.
Cleaning and Maintenance
Before cleaning your heater, switch it off and allow it to cool. Disconnect
the electricity supply to the appliance.
If the outside of the heater needs cleaning, wipe it with a soft, damp cloth
and then wipe it dry with a dry cloth. Allow some time for the heater to dry
thoroughly before reconnecting it to the power supply.
Do not use abrasive cleaning powders or furniture polish, as this can
damage the surface finish.
CAUTION: Never immerse the cord, plug or heater in water or other
liquid for cleaning. Do not allow water to enter the interior of the
heater.
Dust from around the grilles can often be removed by using a vacuum
cleaner with a soft brush attachment.
Storage
If you are not going to use the heater for an extended period of time,
please unplug it at the power point.
Clean the appliance as described above, then store it in its original carton to
protect it from dust. Store it in a cool and dry place, out of children’s reach.
CAUTION!
Always switch off and disconnect the appliance from the power supply
before attempting any maintenance or cleaning the heater.
Do not attempt to open the heater and repair it yourself. Any repairs
must be carried out by a qualified technician.

Related product manuals