EasyManua.ls Logo

Euromatic CH-2000E-1 - Servicing and Technical Specifications; Compliance and Responsible Disposal

Euromatic CH-2000E-1
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | info@tempo.org
Other Useful Information (Cont.)
Compliance
This appliance has been fully tested and meets all requirements as set out by
standards AS/NZS 60335.1 and AS/NZS 60335.2.30.
CAUTION!
Do not attempt to open the heater and repair it yourself. Any repairs must
be carried out by a qualified technician.
Servicing
If your heater requires servicing, please contact our after sales support
centre using the details at the bottom of the page.
If the power cord is damaged and needs replacing, it must be replaced by
a service agent or equivalent qualified person in order to prevent a hazard.
CLASS II - DOUBLE INSULATED APPLIANCE
This symbol indicates that the appliance has been designed in such a way
that it does not require a safety connection to electrical earth (ground).
Technical Specifications
Model No CH-2000E-1
Rated Power 2000W
Rated Voltage 230-240V ~ 50Hz
Ingress Protection IP21 -- protected against ingress of solid
objects up to 12mm (e.g., fingers), and
against vertically falling drops of water,
e.g. condensation
Dimensions (approx.)
565 (H) x 280 (W) x 290 (D) mm
Weight (approx.)
approx. 3.9kg

Related product manuals