EasyManua.ls Logo

Euromatic FH2D - Page 14

Euromatic FH2D
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
After Sales Support
(AU) 1300 886 649 (NZ) 0800 836 761 | tempo.org/support
Battery replacement
The remote control is powered two AAA batteries. When the batteries needs
replacing, insert two new ones of the same type and size, following the
instructions below:
Open the battery compartment at the back of the remote control and
insert the batteries inside, removing the old batteries first.
Care must be taken to insert the batteries according to the correct
polarity (+/-) markings show inside the battery compartment.
Close the battery compartment again.
Other Useful Information (Cont.)
NOTE: The above images are for reference purposes only. The appearance of
the actual remote control may vary slightly.
Do not open the batteries or short-circuit them.
Do not mix different types of batteries. Due to increased risk of leakage,
empty batteries should be removed. The batteries should also be removed
from the remote control if it is not being used for long periods.
Only dispose of batteries when they are fully discharged.
WARNING: Danger of explosion! To prevent a risk of explosion, batteries
must not be charged, heated or disposed of by burning. Never throw
batteries into a fire or subject batteries to high temperatures.
Used batteries should not be disposed of in household waste. Dispose of
them in accordance with statutory regulations.
Battery precautions

Related product manuals