4
EN
INSTALLATION
GENERAL INFORMATION
The washing machine can be installed in any
place on condition that:
3 ° C;
machine are not crushed;
any maintenance.
N.B. Should it prove necessary for electrical
and/or hydraulic maintenance contact only
NOITATROPSNART FO LAVOMER
LOCKING SCREWS
generate strong vibrations and abnormal move-
ment of the machine during the washing with
consequent damages.
screws (which protect it during transport) as
Before operating the machine the screws
must be removed. To unscrew them use a
spanner.
Figure 1
Once unscrewed the screws pull out the
locking screws including a bushing and
spacer as shown in Figure 2.
Figure 2
N.B. In case the spacers fall into the machine
retrieve them and reposition the panel.
Close up the holes with the supplied caps
as shown in Figure 3.
Figure 3
POSITIONING OF WASHING
To ensure stability to washing machine and
avoid strong vibrations during washing and
spinning, it is necessary that the appliance
be placed on a smooth, hard, dry surface and
to act on the height of the feet, by screwing or
unscrewing them according to requirements.
To Next Page
Loading...
Need help?
General
