8
EN
CONTROL PANEL
DESCRIPTION OF COMMANDS
1. PROGRAMME SELECTION KNOB
The knob is used to select a desired programme
and to turn the machine OFF. It can be rotated
in clockwise and counterclockwise for a fast
and easy selection of programme.
2. TEMPERATURE REGULATING KNOB
This knob allows for the adjustment of the tem-
perature. To change setting rotate the knob to
the desired temperature.
3. SPIN REGULATION
This button is used to adjustment the spin
speed. To change setting, press the corre-
sponding key repeatedly until the desired value
si shown on the digit display.
4. EXTRA RINSE AND RINSE HOLD
This button allows for the select extra rinse or
rinse hold function. Upon each press of the but-
ton the LED indicator changes state, there are
three possible combinations which are:
Led steadily on - extra rinse
Led blinking - rinse hold
Led off - exclusion of both
The extra rinse function adds an extra rinse to
standards rinse cycle.
The anti-crease function, when activated the
washing machine stops with water in the tank
without having to drain and spin. To run the
drain and spin, the START/PAUSE at the cor-
responding blinking LED must be pressed.
1 2
7
6
3
4
5
To Next Page
Loading...
Need help?
General
