EUROSTER 2510 User Manual

EUROSTER 2510 – USER MANUAL 1
EUROSTER 2510
Introduction
Congratulations on the purchase of your new Digital Thermostat. Thanks to the latest microprocessor
technology, the thermostat offers many convenient and energy-saving features. Please read the following
instructions fully before installing your thermostat.
B: Overview of features & functions
Your Digital Thermostat incorporates preset daily programs to suit different user lifestyles. The
thermostat can be programmed easily to accommodate exacting user needs. This user guide shows how
to get the best from your Digital Thermostat. It is powered by 2 x AA batteries and can replace most
domestic thermostats.
Caution! The Digital Thermostat has been designed to switch a 230VAC supply. The maximum load is 6
Amps (resistive)/ 2 Amps (inductive).
Installation
Caution! Electricity can be lethal. Before beginning any work, ensure that the electricity supply is turned
off at the mains. If in any doubt, contact a qualified electrician. If you currently have a thermostat
connected by two wires, you can replace it directly with your new Digital Thermostat. If you are not
replacing an existing thermostat, you must install a two-wire cable to your heating system.
1. Before carrying out any installation work, choose an appropriate location for Digital Thermostat
using the following guidelines:
a) Mount the Digital Thermostat approximately 1.6m above the
floor.
b) Only mount on interior walls (the thermostat is not for
outdoor use)
c) Avoid any location where the Digital Thermostat could be
exposed to direct sunlight.
d) Avoid any location in proximity to a heater, cooker, ventilation
outlet or any appliance/fitting that generates heat.
e) Avoid any location where there may be concealed boilers, pipework or chimney flues.
f) Mount away from doors and the corners of rooms.
2. Detach the front cover by sliding it to the left. Remove screw in battery compartment. Open the
front housing from the base by lifting from the left hand side.
3. Unscrew the retaining screw to open the protective cover.
4. Mount the Thermostat base on the wall in the desired location, ensuring that the hole in the wall
is completely covered by the base. Check the wires come in through the protective cover hole.

EUROSTER 2510 Specifications

General

Mounting	Wall-mounted
Temperature Measurement Accuracy	± 0.5 °C
Accuracy	± 0.5 °C
Display	LCD
Weight	150 g
Power Supply	230 V AC
Output	Relay
Temperature Control Range	5 °C to 30 °C
Hysteresis	0.5 K
Switching Current	16 A

Summary

Introduction to Euroster 2510

Overview of Features and Functions

Installation Guide

Choosing the Installation Location

Guidelines for selecting a suitable mounting spot, avoiding heat sources and direct sunlight.

Physical Mounting and Wiring

Steps for detaching the front cover, removing screws, and mounting the base.

Connecting Wires and Power

Instructions for connecting wires to terminals, attaching covers, and inserting batteries.

LCD Display and Key Functions

Operation and Programming

Setting Clock and Day

Procedure for setting the current time and day on the thermostat.

Heating & Air-Conditioning Programs

Details on the thermostat's weekly programmable 7-day/24-hour programs.

Program Review and Adjustment

Reviewing Preset Programs

How to view the default program settings for each day of the week.

Changing Preset Programs

Guide on how to adjust the programmed temperature settings for specific hours and days.

Viewing and Changing Temperatures

Instructions for viewing and modifying the set temperatures for heating and cooling modes.

Temperature Override Modes

Temporary Manual Override

How to temporarily override the current temperature setting for a specified period.

Overriding Temperature Mode

Switching between COMFORT (CT) and EVENING (ET) modes temporarily.

Permanent/Vacation Override

Setting a constant temperature for extended periods, useful for holidays or frost protection.

Advanced Settings and Specifications

Cancelling Overrides

Methods for cancelling manual, temporary, or permanent temperature overrides.

Resetting the Thermostat

How to return the thermostat to its original preset program settings.

DIP Switch Settings

Configuration options for thermostat sensitivity and control mode (Heating/AC).

Technical Specifications

Details on temperature range, power, dimensions, and ingress protection.