EasyManua.ls Logo

Eurotech Dishwasher - Overfill Protection

Eurotech Dishwasher
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
28
CLEANING THE WATER INLET FILTER
In hard water areas, a chemical buildup may form on the water inlet filter. To clean this filter, remove it from
the inlet hose and clean it with warm water and a soft brush.
OVERFILL PROTECTION
Your Eurotech dishwasher has an overfill protection device that automatically shuts off the inlet valve and
starts the drain pump if the water level in the unit should rise above the normal level. If this happens, turn
the water off at the main supply and call for service.
If there is water in the base pan due to an overfill or small leak, the water must be removed before the
dishwasher will start.

Related product manuals