1
2
Loading the Lower Basket
We recommend that you place large items which are most difficult to clean in to the lower basket:
pots, pans, lids, serving dishes and bowls, as shown in the figure below.
It is preferable to place serving dishes and lids on the side of the baskets in order to avoid blocking
the rotation of the top spray arm.
Pots, serving bowls, etc. must always be placed top down.
Deep pots should be slanted to allow water to flow out.
The bottom basket features fold down tine rows so that larger or more pots and pans can be loaded.
5．Loading the Dishwasher Baskets
For best performance of the dishwasher, follow these loading guidelines. Features and appearance
of baskets and Cutlery tray may vary from your model.
Attention before or after Loading the Dishwasher Baskets
1. Scrape off any large amounts of leftover food. It is not necessary to rinse the dishes under
running water. Place objects in the dishwasher in the following way:
A. Items such as cups, glasses, pots/pans, etc. are stood upside down.
B. Curve items, or those with recesses, should be at a slant so that water can run off.
C. They are stacked securely and can not tip over.
D. They do not prevent the spray arms from rotating while washing takes place.
2. Very small items should not be washed in the dishwasher as they could easily fall out of the
Baskets.
3. The upper and lower baskets can not be pull out in
the same time when the dishwasher is Loading, or it
May lead to dumping.
Removing the Dishes
To prevent water dripping from the upper basket into
the lower basket, we recommend that you empty the
Lower basket first and then the upper basket.
Loading the Upper Basket
The upper basket is designed to hold more delicate
and lighter dishware such as glasses, coffee and
tea cup and saucers, as well as plates, small
bowls and shallow pans (as long
as they are not too dirty). Position
the dishes and cookware so that
they do not get moved by the
Spray of water.
Lower basket
Folding racks
Folding racks consisting of two parts that
are located on the lower basket of your
machine are designed in order to let you
place big items easier as pots, pans, etc.
If requested, each part can be folded
separately, or all of them can be folded
and larger can be obtained. You can use
folding racks by rasing then upwards, or
by folding.
For optional
Lower basket
Type
Item
Dessert plate
G
H
I
Dinner plate
Soup plate
Upper basket
Type
Item
Cup
Glass
Saucer
A
B
C
Upper Basket
B
1
B
6
IN
C
1
C
14
B
7
B
12
A
5
A
2
A
14
A
10
Lower Basket
11
10
Basket height adjustment mechanism on the upper basket
of your machine is designed to let you adjust the height of
your upper basket upwards or downwards,without removing
it from your machine when it is full,and create large
spaces at the top or bottom area of your machine as
needed.Basket of your machine is set to lower position in
factory settings.
Upper Basket Height Adjustment
Upper position Lower position
In order to raise your basket,hold it from both sides and pull it upwards.In order to lower it,hold
it from both sides again,and leave it.
In loaded basket adjustment mechanism, make sure that both sides are in the same position
(up or down).
To Next Page
Loading...
