Eurotronic Comet DECT - Radiator Installation; Installation Attention; Installation Without Adapter; Installation With Adapter

98
Installation at the radiator
If the device is in Standby Mode, wake it up by pressing
any key. The display flashes
PREP (Preparation) and then
INST (installation) appears.
Continue with the Installation
Installation at the radiator without Adapter
Valve Adapter – Comet DECT
3.
2.1.
Installation at the radiator with Adapter
Valve - Adapter - Comet DECT
2.
4
.3.
1.
Information on the individual adapters, see page 18 or
visit: www.eurotronic.org/Service/FAQ
ATTENTION
For installation, Comet DECT must be in the INST positi-
on. (Press
MENU
button and with the setting wheel con-
firm the menu item INST with
OK
). For later assembly
also previously select the menu item INST.Always mount
in this position.
Heft-85x120mm-en.indd 8-9Heft-85x120mm-en.indd 8-9 25.01.2016 15:52:2025.01.2016 15:52:20