Evacuator Synergy + User Manual

www.evacuatoralarms.com
Evacuator Synergy + TS Base Station Instructions
SYSTEM SET UP
Evacuator Synergy + Alert System Specification and user operating instructions.
Thank you for choosing the Evacuator Synergy + Wireless Alert system. In order for you to realise the
full potential and reliability of this Category One Wireless system it is vitally important that you read
this user manual in full before attempting to use the system. Failure to understand the correct
installation method and functions of the system may lead to intermittent and unreliable
connectivity.
We would be delighted to assist all Evacuator Alarm clients with free Telephone Support during
office normal hours. For assistance please contact our Technical Support Team on 0845 130 7258 or
alternatively email us on technical@evacuatoralarms.com
Specification Overview (All models)
Mains Powered Evacuator Synergy + TS Base Station which enables users to receive addressable
alerts, check system status and create zones from their Evacuator Synergy + System. Base Station is
navigated using the touch screen, three buttons & Manual Call Point. Indoor Use only, Mains
Powered Device
Fitting the Antenna
The antenna should now be fitted to the Silver TNC docking point located on the top of the unit. The
Antenna should be placed over the TNC connector and twisted in clockwise motion until it locates
into place. Test that it has been located correctly by gently pulling on the Antenna in an outwards
motion.
Connecting Power Supply
Attach the provided 3 pin plug adapter to the power supply. Now plug in the 3.5mm jack into the
socket on the top edge of the product. Now Switch on the wall socket, the unit will power up by
itself.
Please use the supplied 5v 2a power supply provided, failure to do so may damage the operation of
the product.

Evacuator Synergy + Specifications

General

Brand	Evacuator
Model	Synergy +
Category	Security System
Language	English

Summary

System Set Up

Specification Overview

Details on the Mains Powered Evacuator Synergy + TS Base Station features, navigation, and usage.

Fitting the Antenna

Instructions for correctly attaching the antenna to the base station unit via clockwise twisting.

Connecting Power Supply

Guidance on connecting the 3-pin adapter and plugging in the 3.5mm jack to power the unit.

TS Base Station Home Screen

Home Screen Displays

Explanation of 'Units Live', 'Units Registered', 'Battery Low Units', and 'System Status' indicators.

Device Status Indicators

Meaning of Green, Brown, Black, and Yellow indicators for unit operational status and battery levels.

System Menu Operations

Accessing the Menu

Instructions on how to enter the user menu by pressing the 'A' button.

Deleting a Unit

Steps to remove a device from the system using the 'Del Unit' option and the on-screen interface.

Managing Units and Warnings

Checking device status via 'Units On' and toggling the audible warning beep.

Pairing Devices

Guidance and resources for pairing additional devices to the base station.

Alarm Alerts

First Aid Alert

Procedure for acknowledging and responding to a First Aid call on the system.

Fire Alarm Alert

How fire alarms are displayed, identified by unit type, and silenced.

Limited Warranty Information

Warranty Terms and Conditions

Details of the 12-month return-to-base warranty, exclusions, and usage restrictions.