EasyManua.ls Logo

Evak DPC-10 - Technical Data Specifications

Evak DPC-10
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EC DECLARATION OF CONFORMITY
Applicant : EVAK PUMP TECHNOLOGY CORP.
Address of Applicant : No.551, Zhongshan Rd., Qingshui Dist., Taichung City 436,
Taiwan (R.O.C.)
Product Name : Water Pump Digital Pressure Controller
Model No. : DPC-10
Test Report No.:
:
E14060543
Directive : 2004/108/EC Electromagnetic Compatibility Directive
For the most specific risks of this machine, safety and compliance with the essential
requirements of the Directive has been based on elements of:
EN 61000-6-3:2007/A1:2011 / Electromagnetic compatibility (EMC) -- Part 6-3: Generic standards -
Emission standard for residential, commercial and light-industrial environments
EN 55011:2009/A1:2010 / Industrial, scientific and medical equipment - Radio-frequency distur
bance
characteristics - Limits and methods of measurement CISPR 11:2009 (Modified)
EN 61000-6-1:2007 / Electromagnetic compatibility (EMC) -- Part 6-1: Generic standards - Immunity
for residential, commercial and light-industrial environments
IEC 61000-4-2:2008 / Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement
techniques - Electrostatic discharge immunity test
IEC 61000-4-3:2006+A1:2007+A2:2010 / Electromagnetic compatibility (EMC) - Pa
rt 4-3: Testing and
measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
IEC 61000-4-8:2009 / Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement
techniques - Power frequency magnetic field immunity test
Date :
Signature :
Qualification :
General Manager
Place : Taichung City, Taiwan
EVAK PUMP TECHNOLOGY CORP.
No.551, Zhongshan Rd., Qingshui Dist., Taichung City 436, Taiwan (R.O.C.)
1.DPC-10 Panel introduction
2.Technical data
Supply voltage:115~220Vac ± 10% 50/60HZ
Maximum ambient temperature:
+40
Maximum liquid temperature:
+65
Maximum system pressure:
10bar
Maximum contact load AMP:
12A
Ingress Protection Rating:
IP55
Dry Running
Digital Pressure Controller
DPC-10
bar
kg/cm
2
psi
Over Pressure
Power :115-220Vac ±10% 50/60HZ
Max :12A / Max :10bar / IP55
Model Number
LED Light
LCD Display
Technical Data
Button
Pressure Unit
»
»
»
»
»
»
»
Relay Capacity: 1HP in 110V or 2HP in 220V
»
The Max. motor size is 1HP in 110V or 2HP in
220V, but if connect to contactor in the control
panel then DPC-10 controller can fit the pump
over 2HP.

Other manuals for Evak DPC-10