EvaKool DOWN UNDER Series Service Manual

SETTING THE TEMPERATURE:
Important: The temperatures displayed are only an indication of the average temperatures
inside the cabinet. *It is normal for the display temperature to vary +/- 5°C from the set point
when the fridge cycles.
• Hold button for 3 seconds to switch on refrigerator.
• Press button once and the display temperature will begin to flash.
• Use the or to increase or decrease the temperature to the desired setting. The
selected temperature appears in the display for a few seconds and will be applied
automatically, the display flashes several times before it returns to the current
temperature.
SETTING COMPRESSOR SPEED:
• Press button twice, either ECO or MAX will be displayed.
• Use the or buttons to change between ECO and MAX. The display flashes several
times and will then automatically apply the desired setting.
SETTING BATTERY PROTECTION:
• Press the button three times, the L, M or H will display on the screen.
• Use the or buttons to change between Low, Medium and High settings. The display
flashes several times and will then automatically apply the desired setting.
Battery Monitor Mode L M H
Switch-o voltage at 12V 10.1V 10.5V 11.1V
Restart voltage at 12V 10.9V 11.4V 12.4V
Switch-o voltage at 24V 21.5V 22.3V 24.3V
Restart voltage at 24V 22.7V 23.7V 25.7V
SETTING CELSIUS OR FAHRENHEIT:
• Press and hold the and buttons simultaneously for 3 seconds, the "C" or "F" will
flash.
• Use the or buttons to change between Celsius and Fahrenheit. The display will
flash several times before it returns to the current temperature.
DOWN UNDER SERIES
5

EvaKool DOWN UNDER Series Specifications

General

Brand	EvaKool
Model	DOWN UNDER Series
Category	Cooling boxes
Language	English