EasyManua.ls Logo

evapolar evaLIGHT User Manual

evapolar evaLIGHT
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
How to replace the evaLIGHT cartridge
Here's a short extract from our user manual - the Product guide which every box with the
device is supplied with.
You can always buy a new evaLIGHT cartridge on our website.
If you're not sure how to remove or replace the cartridge (which is also often referred as a "filter"
online) from the device, please watch the video or read the instructions below.
Step by step:
1. Disconnect the device from a power source.
2. Remove the reservoir by sliding it up.
3. Use both hands to lift the upper part of the body. Push on both sides of its bottom part
to release the locks and then slide it upwards.
4. Take out the old cartridge by moving it aside.
5. Place the new cartridge in place of the old one, so that it could go in easily. Check the
orientation. Keep pushing until the cartridge is in the center of the device.
6. Put the upper lid of the body back so that it fits the slots.
7. Put the reservoir back in place.
8. The device is ready.
Important:
Depending on usage and storage, the cartridge can last 3-6 months.
Question and Answer IconNeed help?

Do you have a question about the evapolar evaLIGHT and is the answer not in the manual?

evapolar evaLIGHT Specifications

General IconGeneral
Brandevapolar
ModelevaLIGHT
CategoryAir Conditioner
LanguageEnglish

Summary

How to replace the evaLIGHT cartridge

Disconnect Power

Disconnect the device from its power source before proceeding with cartridge replacement.

Remove Reservoir

Slide the reservoir upwards to remove it from the device body.

Lift Upper Body

Lift the upper body using both hands, releasing locks on the bottom part to slide it up.

Remove Old Cartridge

Carefully remove the old cartridge by sliding it out of its housing.

Install New Cartridge

Insert the new cartridge, ensuring correct orientation, and push until centered.

Replace Upper Body

Reattach the upper body lid, ensuring it fits correctly into the designated slots.

Replace Reservoir

Slide the reservoir back into its proper position within the device.

Device Ready Confirmation

Confirm all parts are reassembled correctly; the device is now ready for use.

Important Cartridge Information

Cartridge Lifespan

Depending on usage and storage, the cartridge can last 3-6 months.

Water Quality Impact

Poor water quality reduces the longevity of the cartridge.

New Cartridge Storage

The new cartridge can be stored for up to 3 years without losing its evaporation potential.

Related product manuals